Our Products

 Click Here for Air Horns & Air Kits

Click Here VIAIR On Board Systems

Click Here AirLIFT Air Suspensions

Click Here for 100% Stainless Exhaust Tips

Click Here for High Performance Catalytic Converters

Click Here for Billet Aluminum Fuel Doors

Click Here for Race Performance Gauges

 

Posts tagged: chrome exhaust tip

2010 Dodge Challenger-Awesome Exhaust Tips

John W sent us some pictures of the AC1050 T304 Stainless Steel Exhaust Tip by Assured Performance installed on his 2010 Dodge Challenger.

He purchased the exhaust tips from Assured Automotive Company.

John believes, and so do we, that replacing the stock tips on his Challenger was a huge improvement on the looks of his ride.

John stated the did need to cut off the rear inside corner of the exhaust tip at about a 40 degree angle.  They then welded on a stainless or aluminum strip 3″x 3″ in size.

This allowed for room next to a molded undercarriage part.

The AC1050 Exhaust Tip is double walled and the outlet has an inside roll.  These tips have 2.25″ID inlet and the out dimensions are 7.25″ wide by 3″ tall.

This exhaust tip, like all of the Assured Performance Exhaust Tips are hand polished to mirror finish.

The heavy gauge stainless simply just adds to the top quality Assured Performance offers.

Assured Automotive Company want to congratulate John on a customizing job very well done.

We are looking forward to more pictures about his future projects.

Gloss Black Exhaust Tip – 2000 BMW 323i

Josh F. sent us pictures of the new Assured Performance “Black Powder” exhaust tip on his 2000 BMW 323i 2.5L. I-6.    The tip he purchased for his project was part number AC079-BKG.

The tip was purchased from Assured Automotive Company.

Assured Performance Exhaust Tip AC079-BKG is a dual outlet with the outside dimensions of the outlet measuring 3 inches tall and 7.4 inches wide.  The length is 9.5 inches.  The inlet inside diameter is 2.5 inches.

Judging by the under carriage picture Josh sent us, no modifications were needed for install.

Josh had the exhaust tip welded on and it looks like he did a little bit of trimming on rear valance.  Trimming is sometimes required to allow clearance of the exhaust tip exiting the back of the vehicle

Looks Great Josh!!

Thank you for the pictures!!

Todd’s ’08 Duramax “Big Daddy” Exhaust Tip

Test Pics for Exhaust Catagory

More info on this tip-Click HERE

Hey Guys,

I Want thank Assured Automotive Company for this exhaust tip!!

Finally a tip that will not rust or turn brown!!

I took this pic after we drove the truck about 25,000 miles, pulling a 20k lb goose neck trailer at that!!.  The TIP  looks like the day we put it on.

To install on my ’08 Chevy Duramax, We removed the Muffler Back tail section & replaced it with a pre-bent 5” tailpipe.  Cut the rear end back about 15 ” and bolted the tip on(we did put a few spot welds on it-per you suggestion).

About 4 of my co-workers have also bought these Chrome over Stainless Tips, they are just as happy as ME!!!!

Please post photo I sent you on your photo page.

I will be back!!

Todd W.  Woodruff, WI

View this DIESEL tip and more on our website-Click HERE