Our Products

 Click Here for Air Horns & Air Kits

Click Here VIAIR On Board Systems

Click Here AirLIFT Air Suspensions

Click Here for 100% Stainless Exhaust Tips

Click Here for High Performance Catalytic Converters

Click Here for Billet Aluminum Fuel Doors

Click Here for Race Performance Gauges


Posts tagged: air bags

Train & Truck Air Horn Kit Install Part 3

Part 3 of 3

So you bought yourself an air horn kit for your ride.  Congratulations!!  There are many different applications that an air horn and a VIAIR on board air system can be install in. We cannot possible cover them all.  Below are some suggestions and things to think about BEFORE you install your new air horn kit.  Assured Automotive Company has been in the auto industry since 1994.  The sales staff and technicians got together to give you some suggestions.

Now you have your Assured Performance Air Horn location decided along with were you are mounting your VIAIR air components.  You now need to put it all together. We will just focus on the VIAIR under body style kits.  These are kits were the compressor is not part of the air tank assembly.

1. Connect the compressor stainless steel leader line to tank port.  Keep in mind you will want to use teflon tape or plumbers dope on all threads you are screwing into the tank. You will not want to use the port on lowest part of tank.  You will need that port for the tank drain petcock.  When screwing the compressor leader line into the tank pay special attention to not cross the threads.  DO NOT over tighten the leader line, see warning label on leader line.  If compressor is not located close enough to the tank to use the leader hose, use the “T” fitting and use 1/4 inch line included with the kit.

2. Thread the VIAIR pressure Switch/Relay that is included in the kit into a tank port.  Wire the relay.  White wire to compressor positive wire.  Run the red wire with the inline fuse from battery to the red wire on relay labeled “battery”.  Pull fuse from inline fuse holder before connecting to battery terminal.  Run another wire from an ignition source inside the vehicle, like the radio circuit, to the switch panel included with kit.  Then run a wire from switch panel to the relay lead marked “trigger”.  Ground the black wire on relay and compressor.  Your system is now wired up.

3. Run the 1/4″ air line included with the kit to the air horn solenoid.  Avoid kinking the air line. Avoid shape bends.  If your horn included a barbed fitting on the solenoid, remove the fitting and replace it with the compression fitting included with the kit.  Connect the air line to the solenoid.  Insert a compression fitting in one of the tank ports and connect the air line.  Included in the kit is a pressure safety valve for the tank.  It is a good idea to use this valve.  Thread the included safety valve in a vacant tank port.  On the most bottom tank port thread the included drain petcock into it.

3. The Train Horn kits that Assured Automotive Company sells include air solenoids or electric air valves.  These valves is what allows the air from the air system to enter the horn manifold, thus sounding the horn.  When the solenoid receives 12-24 VDC it opens and allows the pressurized air to pass thru to the horn manifold.  You can use your existing horn switch(steering wheel) or you can incorporate a separate momentary switch.  With Assured Performance Air Horn Solenoids a relay is not required, amperage draw is only 3 amps.  Wire one of the solenoid wires to a 12v positive source.  Ground the other wire.  It doesn’t matter which wire you use for the positive.

4. You are now ready to air up.  Double check all your wiring and air line connections.  When everything checks out, insert fuse into the inline fuse holder.  Start your vehicle, Switch the panel switch to ”on”.  Compressor will begin to fill the tank.  Depending on compressor size and tank size this could take anywhere from 1 minute to 5 minutes to fill to 150psi.  Being sure everyone within 100 feet of vehicle has ear protection, you can now test the horn.

5. Last step.  With a spray bottle of 1 part dish soap and 5 parts water, spray all the air fitting on the system checking for leaks. Fix leaks by either tightening fittings or using extra teflon tape or plumbers dope.

6. ENJOY!!

The staff at Assured Automotive Company would be more than happy to assist you with any install or mounting questions you may have.  We are sure you will enjoy your NEW Assured Performance Air Horn for years to come.

Air Lift Air Bag Suspension Kits

Air Lift manufacturer has air suspension kits for most vehicle applications.  Whether you  looking to slam you new Honda Accord or you want stability for heavy hauling in your F-Series Ford Pickup.  Air Lift Suspension is your answer.

Air Lift has a Customer Satisfaction Warranty and a Lifetime Warranty on their Air Bags.

Hauling Additional Weight

Adding air springs does not change the Weight Rating (GVWR, GCWR, GAWR) of a vehicle. Adding weight over the factory rating is dangerous and voids your Air Lift warranty. Weight ratings take into account tires, bearings, frame, brakes and more. So just increasing your suspension’s ability to support weight does not increase the weight ratings. Never exceed your vehicle weight ratings.

Air System

A common question about air suspension is whether an air system is needed for air suspension.  The answer is no, but it is sure nice to have.  You can add air from any source as long as it provides sufficient pressure to service the springs. On Board Air has become popular because it is so convenient, and because it is harder to find service stations with air available. All adjustments are automatic, or can be made right from the dash, even while driving.

Lifting Your Vehicle

If you’re asking if conventional air springs can take the place of a lift or lowering kit, the answer is NO. If you’re asking if air springs will cause a normal ride height vehicle to ride higher, the answer is, YES, if you want them to, by adding pressure, but only by an inch or two. If you DO want to lower your vehicle, look into AirLift EasyStreet line of products.

Who do you call?

With a lot of knowledge and fast service BEFORE and AFTER the sale, Assured Automotive Company is your answer.  AACo will put together the correct air suspension for your application and for the BEST Prices.

AACo can set up complete system that allows user to use air tools, air horns, and of course air suspension.

Don’t drive unstable loads anymore, air suspension kits start at under $300. A very small price to pay for safety of driver and other road users.

Be Safe Out There..Happy Motoring.